We are excited to announce the launch of our new forums! You can access it forums.aavso.org. For questions, please see our blog post. The forums at aavso.org/forum have become read-only.
This is a cv, so one could expect a fairly blue color. But the problem with the Tycho-2 measure quoted by Wikipedia is that the uncertainty is omitted. The star is mag 12-ish, so is right at the limit of detectability for Tycho-2. The uncertainty on the B value is nominally 0.09 mag, while that for V is 0.21 mag. 'Real' Tycho-2 errors for faint stars (fainter than 9th) are in fact about 50% larger than this, so the implied B-V color is very uncertain. VSX quotes the APASS B-V, whose uncertainty is 2.14 mag(!), which surely comes from the mean value including outburst as well as quiescent data (says 14 observations on three nights). The Mermilliod UBV compilation quotes B-V = 0.00, but you'd have to look up the source for that. If there are some A- or F-type stars in the field, you might select those as comps, but they are relatively uncommon, so you'll have to use whatever's available. Since this is a well-observed object, I am surprised there is no 'official' AAVSO sequence, or that one exists in the literature. SIMBAD shows no Henden biblio item for RX And, so evidently Arne did not get to this one as part of cv calibration papers he did 20+ years ago.
Certainly if you have transformation coefficients for your system, by all means try it. There is a modest range in color in the Lenouvel sequence, perhaps other stars in the field, too. So you may be able to get a fairly good value from stars just in that area.
Just to be clear, you're talking about RX And, right?
The B-V listed in VSX comes from APASS
APASS-DR9 B = 13.71 V = 13.43 g' = 13.53 r' = 13.31 i' = 12.65 B - V = 0.28
This is a cv, so one could expect a fairly blue color. But the problem with the Tycho-2 measure quoted by Wikipedia is that the uncertainty is omitted. The star is mag 12-ish, so is right at the limit of detectability for Tycho-2. The uncertainty on the B value is nominally 0.09 mag, while that for V is 0.21 mag. 'Real' Tycho-2 errors for faint stars (fainter than 9th) are in fact about 50% larger than this, so the implied B-V color is very uncertain. VSX quotes the APASS B-V, whose uncertainty is 2.14 mag(!), which surely comes from the mean value including outburst as well as quiescent data (says 14 observations on three nights). The Mermilliod UBV compilation quotes B-V = 0.00, but you'd have to look up the source for that. If there are some A- or F-type stars in the field, you might select those as comps, but they are relatively uncommon, so you'll have to use whatever's available. Since this is a well-observed object, I am surprised there is no 'official' AAVSO sequence, or that one exists in the literature. SIMBAD shows no Henden biblio item for RX And, so evidently Arne did not get to this one as part of cv calibration papers he did 20+ years ago.
\Brian
SIMBAD shows the B-V as .283, coming from the UCAC4 catalog. As Brian said, the Tycho value seems highly suspect.
"SIMBAD shows the B-V as .283, coming from the UCAC4 catalog." ...which comes from an early version of APASS.
Meanwhile, there is a B,V sequence from long ago by Lenouvel & Daguillon available with a chart here:
https://articles.adsabs.harvard.edu/pdf/1956JO.....39....1L
\Brian
Kevin
Yes. Thanks.
Kevin
I usually…
Thanks Brian,
I usually measure B and V so I wondered after your comments how wise it would be to use my own calculated.
Thanks for the guidance.
Regards
Kevin
Certainly if you have transformation coefficients for your system, by all means try it. There is a modest range in color in the Lenouvel sequence, perhaps other stars in the field, too. So you may be able to get a fairly good value from stars just in that area.
\Brian
Regards
…
Thanks again Brian
Regards
Kevin